- Polypropylene PPR Pipes
- Fiber Glass Three-Layer PPRC Fibre Pipes
- Polypropylene Socket Pipes for Internal Sewage
- Drip Irrigation Pipes
- Pipes PE 100
- Welded Fittings for PE 100 Pipes
- PPRC fittings
- Corrugated Pipes
- Single-Layer Corrugated Pipes
- Double-Layer Corrugated Pipes
- Double-Layer Corrugated Polypropylene Pipes
- Fittings for Corrugated Pipes
- Concentric and Eccentric Crossovers
- Spirally Rolled High-Pressure and Low-Pressure Pipes with a large diameter
- Cast Fittings for PE 100 Pipes
- PPH Sewage Fittings
Double-Layer Corrugated Pipes
General information
The double-layer pipes are resistant to physical, chemical and technical effects at the depths of 1–15 meters and at temperature range of -40 ºС /+90 ºС. At the same time, the corrugated pipes prolong the life cycle of engineering structures while minimizing the time loss for repair and maintenance of these structures.
Polymeric Products Plant produces a new type of double-layer polyethylene pipes. Heavy surface and light weight make them indispensable. These pipes ensure the safety of power and telecommunication lines.
The double-layer pipes withstand physical, chemical and technical effects at depth of 1–15 m and at temperature range of -40 ºС / +90 ºС. At the same time, the corrugated pipes extend the life cycle of engineering structures while minimizing the time loss for repair and maintenance of these structures. Depending on the area of application, the corrugated pipes manufactured in STP come in three color: red – for power transmission lines, blue – for telecommunication lines, black – for other purposes. The smooth inner surface minimizes the friction.
The advantages of the corrugated pipes manufactured in STP Polymeric Products Plant are following:
- easy cable laying and installation due to smooth inner surface;
- long-term life cycle and cost-effectiveness;
- irreplaceable in installation of drainage systems;
Material | Top layer | HDPE |
Inner layer | HDPE | |
Application | 1. Protection of low and high voltage conductors from mechanical impacts 2. Protection of environment from aggressive impacts when laying conductors in the ground 3. Concealed by any methods (as part of concrete) 4. Discharge of unpressurized wastewater, groundwater and rainwater | |
Operating temperature | From – 40 0C to +90 0C | |
Colour |
|
The colour of pipe walls may be changed on clients request |
Raw polyethylene brand | ||||
¼ | Diameter | Pipe top layer | Pipe inner layer | Destination |
1. 2. 3. 4. 5. 6. 7. | Dn 75 Dn 90 Dn 110 Dn 125 Dn 160 Dn 200 Dn 250 | HDPE HDPE HDPE HDPE HDPE HDPE HDPE | HDPE HDPE HDPE HDPE HDPE HDPE HDPE | Telecommunication Telecom–drainage Telecom–drainage Telecom–drainage Telecom–drainage Telecom–drainage Sewage-drainage |