Single-core XLPE Insulated, PVC sheathed high voltage cable with  a copper conductor

Structure:

1. The conductor is copper, multi-wire compacted, round form, corresponds to class 2 of IEC 60228

• The cross-section of a multi-wire compacted round conductor is 25÷800 mm²
• The cross-section of a multi-wire compacted round conductor, consisting of 5 sectors, is 1000÷1600 mm²

2. The conductor screen is made of extruded semiconducting cross-linked polyethylene
   3. Insulation is cross-linked polyethylene (2X)
   4. Insulation screen is made of extruded semiconducting cross-linked polyethylene
   5. The separation layer is made of the electrically conductive water-blocking tape
   6. The screen of the copper wires fastened with copper tape (S)

Minimum cross-section of screen for cables with a conductor cross-section of 25-120 mm² is 16 mm²
Minimum cross-section of screen for cables with a conductor cross-section of 150-300 mm² is 25 mm²
Minimum cross-section of screen for cables with a conductor cross-section of 400-1000 mm² is 35 mm²
Minimum cross-section of screen for cables with a conductor cross-section of 1200 mm² and above is 50 mm²
The maximum cross-section of screen can be set based on the customer's request.

7. The separation layer is made of PETF tape
   8. The outer protective shell is made of PVC (Y)

Specifications:

• Operating conductor temperature: +90 ⁰C
• The maximum heating temperature of the cable conductors in case of emergency: +130 ⁰C
• The maximum heating temperature of the cable conductors in case of a short circuit: +250 ⁰С
• The duration of a short circuit (not more than): 5 seconds
• Cable laying temperature (not less than): -15 ⁰С
• Ambient temperature: -50 / +50 ⁰C
• Minimum bending radius of the cable: 15xD (D – outer diameter of the cable)

NOTE: Technical specifications are given in Table 1.