N2XY-LS FE 180

General information

The cable N2XY-LS FE 180 is used for transmission and distribution of electric power in case of fire (to provide power supply to fire safety circuits and fire extinguishing pumps, lighting of evacuation and emergency exits, evacuation lifts, air ventilation, explosive zones, operating units of hospitals).

The cable N2XY-LS FE 180 is used for transmission and distribution of electric power in case of fire (to provide power supply to fire safety circuits and fire extinguishing pumps, lighting of evacuation and emergency exits, evacuation lifts, air ventilation, explosive zones, operating units of hospitals). The cable provides transmission and distribution of electricity in public places and residential buildings, as well as in computerized facilities equipped with microprocessor technology.

STRUCTURE

 

  1. An electric conductor
  2. Thermal barrier from mica tapes
  3. SPE insulation
  4. Interfacial filling with low smoke and gas emission
  5. Thermal barrier of fiberglass
  6. PVC shell with low smoke and gas emission

Cable properties

Cross-sectional area of conductor, mm2

The number and section of conductors, pcs. x mm2

Note

1.5 ÷ 10 RE

2, 3, 4, 5 x 16-240
1x16÷1000

Flame-retardant halogen-free power cable made of copper wires with SPE or non-combustible insulation, preventing from burning, and with non-burning shell, preventing from burning

Low voltage power cables of other sizes are manufactured at the STP cable factory as well.

TECHNICAL SPECIFICATIONS:

  • Fire-resistance period when exposed to an open flame: up to 90 ÷ 180 minutes
  • Maximum flame temperature: 1000 °C
  • Rated operating voltage: 0.66, 1.0, 3.0 kV
  • In case of a large number of conductors, the cross-section must not exceed 400 mm2.
  • In case of an operating voltage of 0.66 kV, the cross-sectional area of the conductors must not exceed 50 mm2.
  • Operating cable temperature: -50 °C / + 50 °C
  • Relative air humidity: 98 %
  • Service life: 25 years