-
Polycarbonate sheets
General
information
Lightweight of honeycomb polycarbonate boards allows to produce original constructions, increases the volume of lighting area and provides installation without the help of lifting devices;
Application of honeycomb polycarbonate decreases the cost value of the building, as well as light weight layers allow the reduction of the volume of buildings;
Easy treatment – layers may be easily cut with simple cutting tools in any form;resistance to chemical substances – honeycomb polycarbonate sheets are resistant to the effect of many chemical substances and compounds;
Easy cleaning– honeycomb polycarbonate sheets are easily cleaned with ordinary water and cotton cloth (sometimes use of cleaning agents is allowed, however it is not recommended to clean the polycarbonate with ammonium agents since they damage the polycarbonate);
One of the features of polycarbonate sheets that necessitates its use in construction industry is its suitablility in all climatic conditions, for example the properties of the material do not change in the temperature range of -50 °C / +120 °C and it i
Plant of Polymeric Products offers high quality polycarbonate sheets with thickness of 4 mm – 40 mm. Areas of application of honeycomb polycarbonate boards are as follows depending on their thickness:
-
4mm;
winter gardens, greenhouses, suspended ceilings and advertising constructions (exhibition stands and showcases);
-
6mm;
wide area of application (canopy, greenhouses, stained glass);
-
8mm;
wide area of application (partitions, canopies, greenhouses and roofs);
-
10mm;
for complete glazing of vertical and partially horizontal surfaces (skylights, sound-proof fences for highways);
-
16mm;
for big span ceilings (buildings, facilities);
-
20mm;
glazing of stadiums, sports facilities, pools, pedestrian crossings, parking coverings, attic windows and balconies.
Technical parameters of polycarbonate
-
- 4
- 6
- 8
- 10
- 16
- 20
-
- 0.9
- 1.3
- 1.5
- 1.7
- 2.7
- 3.1
-
- 0.7
- 1.05
- 1.3
- 1.6
- 2.5
- 3.5
-
- 16
- 18
- 19
- 20
- 21
- 23
-
- 0.24
- 0.27
- 0.28
- 0.29
- 0.36
- 0.37
-
- 4.1
- 3.7
- 3.6
- 3.1
- 2.0
- 1.8
-
- 84
- 82
- 82
- 80
- 76
- 79
Area of application of honeycomb polycarbonate:
-
- light-conducting roofs;glazing of roof, walls and showcases;arch coatings, attics;skylight;petrol stations, parking, bus stations and bus stops;pools, sports facilities;fencings, sound-proof internal partitions;glazing of inside doors and balconies
-
- Greenhouses;Winter gardens;Warehouses
-
- Exhibition stands; Pavilions;Showcases; Outdoor illuminated advertising boards.
POLYCARBONATE
PROFILES
Polycarbonate profiles are designed especially for installation of honeycomb polycarbonate boards. Bending radius and thermal expansion factor of profiles match with those parameters of sheets.Polycarbonate profiles have very high durability with good light transmission and small weight and withstand the effects of ultraviolent rays.The connecting profiles are used in application of very long honeycomb coatings and in semi-dark roof coatings so that light beams can pass through joints of sheets. Profiles are coated with special outside protective coating in order to protect them from sun radiation rays.Advantages of polycarbonate profiles: light beams transmission at joints of of polycarbonate sheets; very light weight; easy bending and sealing coatings.
Technical characteristics:
-
Profile type
HP 4-6
HP 8
HP 10
Geometry dimensions mm
A 8,76
B 52.55
A 11,3
B 68,72
A 14,04
B 84,89
Profile weight, q/m
106
183
277
Profile wall thickness,mm
0,71
0,93
1,15
Profile length,m
6
-
Profile type
HCP 8-16 (qapaq)
HCP 8-10 (baza)
HCP 16 (baza)
Geometry dimensions mm
A 18,6
B 60
A 16,4
B 62
A 23
B 62
Profile weight, q/m
184
166
206
Profile wall thickness,mm
1.2
Profile length,m
6
-
Profile type
UP 4
UP 6
UP 8
UP 10
UP 16
Geometry dimensions mm
A 6,8
B 24,0
A 9,0
B 25,0
A 11
A 13,0
A 19,0
Profile weight, q/m
50
64
68
70
72
Profile wall thickness,mmProfile wall thickness,mm
0,9
1,0
1,0
1,0
1,0
Profile length,m
6
Advantages
of
polycarbonate
over
- Impact resistance
- Light weight.
- High thermal insulation
- High transparency
- Excellent sound insulation
- Durability
- Safe glazing
- UV protection
-
- Unsplit connecting profiles, first of all, are used in small construction polycarbonatesheets– in constructions with less connection distances. This profile is ideal for connection of vertical polycarbonate profiles (office partitions, advertising boards, light boxes etc.).
-
- These profiles provide quick and reliable connection of boards with frame and at the same time with each other. Profile consists of two parts: bottom - “base” and top- closing “cover”.
-
- This type of polycarbonate profiles are designed for covering and sealing of ends of polycarbonate sheets. Covering profiles border the ends of polycarbonate sheets, protect them from break, bending and other deformations as well as eliminates condensate generated inside porosities. These profiles may also be used for bordering of ends of sheets made of other sharp (stiff) materials with appropriate thickness.
-
- With 50 years of life cycle these panels are used for many purposes, especially in constructions of roofs. They are indispensable in terms of efficient use of sunlight and energy saving. Covering connections of polycarbonate panels provide their tight connection with sandwich panels and with each other.
-
Profile type
HP 8
HP 10
Profile weight, q/m
183
277
Geometry dimensions mm
11,3 68,72
14,4 84,89
Profile wall thickness,mm
0,93
0,93
Profile length,m
6
Polycarbonate panels with covering connection
